Next, mix some toothpaste with a bit of baking soda to create a paste, which you’ll be using. With this paste, apply it directly over the stain, and wait a few minutes for it to interact with the wood. After about 10 minutes, remove the paste with a clean cloth.
You better do so since stripper may change the color of slats. You don’t have to strip the railings but I would recommend it for the best results of the new stain. Since you will not change the color pale spots from the old coating will not be a problem . Deck strippers soften the existing stain so it’s easier to remove. Smooth the surface of the wood using a fine-grit sandpaper. Fine-grit sandpaper will get rid of any scratches caused by the medium-grit sandpaper you used.
Use as little alcohol as possible; too much will damage the finish. Chemical and citrus strippers can mar the surrounding areas. If you’re stripping a staircase, for example, protect the walls and floors at the head and foot of the staircase with drop cloths and painter’s tape. Moveable items such as tables or cabinets also need a drop cloth underneath and painter’s tape around any fixed parts or accents you don’t need to strip. Where possible, remove hinges, bolts and drawer pulls to strip the wood item more completely. If you’ve chosen a chemical stripper, move the item outdoors or ventilate the room as much as possible with open windows and fans.
How To Remove Dark Stains From Wood
Unpredictable weather conditions combined with general wear and tear can cause a lot of damage to even the highest quality finishes. With the proper use of stripping treatments, deck brighteners and fresh coats of stain, you can keep your wooden deck looking beautiful for years. These techniques are also great for correcting mistakes. Even if you spill some, you can use a small amount of stripper and brightener to fix up any mess. Even a dark brown solid stain on top of bright blue paint.
Tip: Is It Worth Stripping?
Before sanding your surface, wear safety goggles along with a facemask. Start by pouring the wood stain remover into either a glass or metal container https://www.quia.com/pages/rkoons378/page1 and proceed to apply it according to the instructions stated on the remover. To do so, you’d want to use a paintbrush with natural fibers.
Darker rings and large stains are more difficult. The moisture has penetrated the finish and seeped into the wood causing it to darken. Dark rings can be removed with some elbow grease and patience. However, depending on the extent of the stain and damage to the wood, refinishing the floor or replacement of the boards may be the best option. Oil stain on floor from clothes steamer – nasty dark mark on oak hardwood floor. Soaked two cotton pads with peroxide & laid on stain for 2 full days, checking every 8 hrs or so to be sure the wood was ok.
Trying mixing toothpaste with baking soda for an even more durable blend. For chlorine bleach, start with a solution of four parts water to one part bleach. Follow the same instructions as for hydrogen peroxide, repeat the steps strengthening the bleach and water solution until the dark stain is gone. If the stain remains, treat again with 100 percent hydrogen peroxide for ten minutes and allow to dry overnight. If the stain remains, move on to chlorine bleach.